How Much Should It Cost To Replace A Toilet?

How much does Home Depot charge to install a toilet?

How much does Home Depot charge for toilet installation.

Home Depot does not hire installers; they subcontract installation to local plumbers and electricians, but they advertise on their site that toilet installation costs $269..

What is the lifespan of a toilet?

10-15 yearsOne of the most used fixtures in your home, the toilet, on average has a lifespan of 10-15 years.

Are old toilets better than new ones?

The biggest difference between older toilets and the models available today is the amount of water they use. Toilets manufactured after 1992 need less than half as much water per use as many older units, while providing a better flush and new convenience features.

Should you caulk around a toilet?

Caulk helps to keep the toilet secured to the floor. The bolts are really supposed to keep the toilet secure, but caulk helps. … Some people prefer to caulk all around the toilet and leave about a one-inch gap in the caulk at the back of the toilet to allow water to escape out in the event of a leak.

How often should you replace your toilet?

Although some plumbers would say a toilet could last up to 50 years, a federal law actually states that any toilets built before 1994 that holds more than 1.6 gallons per flush must get replaced. So there you have it.

How do you measure to replace a toilet?

To measure the rough-in for your toilet, measure from the wall behind to the toilet to the middle of the closet bolt caps on your current toilet. The closet bolts are the bolts holding your toilet to the floor. If you have baseboards or tiling on the wall behind the toilet, do not include those in your measurement.

How do I know if my toilet is 10 or 12?

Take the cover off of the toilet tank, and lay the toilet on its side to access the underside of the base. Measure from the back edge of the base to the center of the closet hole, or drain hole. Note if the measurement is 10 inches or 12 inches.

Can I replace a round toilet with an elongated toilet?

Elongated — This toilet has a slightly longer, egg-shaped bowl for extra comfort. So, in the past the bad news was that if you wanted to replace a round-front toilet with an elongated, in many cases the longer toilet would not fit the space. … Most toilets will have a 12 inch rough-in.

How much should a plumber charge to replace a toilet?

How much will it cost? A plumber can cost from $60 to $12,000, depending on the job. Expect to pay $60 to $140 to fix a tap or leaking toilet, $250 to install basin taps or a new shower head, $550 to install a toilet, $1,200 for hot water service replacement and $12,000 to install solar hot water.

Can you replace just the tank of a toilet?

Replacing a toilet tank is a task most homeowners can do without a call to the plumber. Because the tanks and bowls may be sold separately, you can often buy just the tank. … Drain the water from the bowl and the tank by flushing the toilet.

Can a handyman change a toilet?

A qualified handyman, though, can often tackle in one visit several smaller projects that don’t require licensing. … “And even most of the electrical and plumbing we can do without licensing. For plumbing, a license is required if you’re changing lines, but we can install a toilet.

How long should it take a plumber to replace a toilet?

Most plumbers charge $65 per hour and need between two and four hours to install a toilet.

How long should toilets last?

50 yearsToilets can last for up to 50 years under average conditions. However, this doesn’t mean that you won’t need to spend money maintaining it throughout its useful life. Furthermore, there are many factors that could cause your toilet to fail in less than 50 years.

Is replacing a toilet difficult?

Replacing or installing a new toilet isn’t as hard as it may sound. All you really need are a few hours of time and the right tools for the job. So, gather up your new toilet, replacement wax ring, rubber gloves, hacksaw, a putty knife, adjustable wrenches, plunger, a bucket and some old rags.

Do you need a plumber to install a new toilet?

Our research team found that a plumber usually requires an hour or two to install a toilet. The process generally includes: … Draining the old toilet, removing it and inspecting the flange — which connects the toilet to the drainpipe on the floor — to see whether repairs are needed.